RAW MATERIALS FOR CEMENT MIXTURES

Portland cement concrete is the most widespread building material in the world.

Concrete can be considered a compound material in which cement and water constitute the continuous matrix or pulp, that is reinforced with the addition of ""aggregates"" (sand, metaling).

Until 1930 the composition of concrete was restricted to three components: cement, water and aggregates. The need to improve its performance in the wet and/or hardened state to make it suitable for particular or specific applications that would otherwise be impossible and the need to cast it led to the development of additives, commonly known as ""Chemical Additives"".

Chemical additives are usually constituted by a carefully balanced blend of components that lend the concrete properties that allow it to satisfy the necessary performance.

Bozzetto manufactures some basic ingredients used in the composition of chemical additives used in concrete, precisely dispersants or superplasticizers.

Known under the trade name of FLUBE & SUPLA and the group of retardantsknown under the tradename of VEBE.



SUPERPLASTICIZERS

POLYNAPHTHALENE

- Liquids
: Flube CPL
calcium salt specifically used in plaster

: Flube CA 40
calcium salt

: Flube OS 39
sodium salt with low salt content


- Powders
: Flube CA 140
calcium salt

: Flube OS 139
sodium salt with low salt content

: Flube CR 100
sodium salt with intermediate salt content

CARBOXYL POLYMERS GRAFTED WITH LATERAL CHAINS

- Liquids
: CM 1142
product with secondary retardant action

: Supla 50
rapid resistance development product, specially designed for pre-casting and/or cold climates.

: Supla RM 12
highly-effective product, specially designed for high-resistance concrete


- Powders
: CM 1142 Pdr
product with secondary retardant action

RETARDANTS

ALKYL PHOSPHONATE-BASED PRODUCTS

- Liquids
: VEBE DP 889 S
highly-effective retardant for cement mixes.

: CM 1272
retardant/dispersant for mix cements, synergic action with Supla superplasticizers.

: CM 1201
retardant/dispersant for mix cements, synergic action with Supla superplasticizers.

: VEBE DP 1035
highly-effective retardant for cement mixes

: VEBE DP 1122
highly-effective retardant for cement mixes, chloride-free.


- Powders
: VEBE DP 1122 G
highly-effective granule retardant for cement mixes, chloride-free

: VEBE DP 1122 Pdr
highly-effective powder retardant for cement mixes, chloride-free

VISCOSITY MODIFYING AGENTS

: CM-T 2
acrylic-based polymer, easy batching low viscosity liquid; increases cohesion for underwater casting or for the preparation of self-compacting concrete.

NON-FOAMING AGENTS

: Non-foaming agents CM 1
universal non-foaming agent, compatible with naphthalene sulphonate polymers and carboxyl polymers.




: HOME: THE GROUP: PRODUCTS: CUSTOMER